Bevel Gear Screw Type Linear Actuator for Industrial Machinery

मूल्य और मात्रा

• न्यूनतम आदेश मात्रा 1

• Stroke Limiting Device Integrated mechanical limit switches optional.
• Application Ideal for lifting, positioning, or translating loads in automated, heavy industrial systems including conveyors, presses, assembly lines, and machine tools.
• Protection Rating IP54 or higher upon request.
• Material High-strength alloy steel shaft and gears; actuator body made from heavy-duty cast iron or aluminum.
• Lubrication Sealed and lubricated for lifetime maintenance-free operation.
• Duty Cycle Suitable for continuous or intermittent operation.
• Input Shaft Options Available in single or double input shaft configurations.
• Travel Speed Depends on gear ratio and drive input, generally up to 200 mm/min.
• Load Capacity Varies by model-typically from 1 ton up to 10 tons.
• Gear Ratio Multiple gear ratios available (standard 1:1 up to 5:1).
• Linear Movement Type Screw-driven linear actuator with bevel gear drive.
• Operating Temperature Range -20C to +80C.
• Surface Treatment Corrosion-resistant coating available for aggressive environments.

उत्पाद की विशेषताएं

• प्रेशर Designed for mechanical load transfer; applicable load up to 10 tons, not rated for fluid/gas pressure.
• सटीकता Positioning accuracy up to 0.1 mm depending on model and application.
• साइज Standard models with stroke lengths ranging from 100 mm to 1500 mm; custom sizes available on request.
• कनेक्शन Flanged mounting ends with provision for threaded rod or clevis connection.
• फंक्शन Converts rotational motion into precise linear movement using a bevel gear and screw mechanism for industrial machinery positioning and actuation.

• Stroke Limiting Device Integrated mechanical limit switches optional.
• Application Ideal for lifting, positioning, or translating loads in automated, heavy industrial systems including conveyors, presses, assembly lines, and machine tools.
• Protection Rating IP54 or higher upon request.
• Material High-strength alloy steel shaft and gears; actuator body made from heavy-duty cast iron or aluminum.
• Lubrication Sealed and lubricated for lifetime maintenance-free operation.
• Duty Cycle Suitable for continuous or intermittent operation.
• Input Shaft Options Available in single or double input shaft configurations.
• Travel Speed Depends on gear ratio and drive input, generally up to 200 mm/min.
• Load Capacity Varies by model-typically from 1 ton up to 10 tons.
• Gear Ratio Multiple gear ratios available (standard 1:1 up to 5:1).
• Linear Movement Type Screw-driven linear actuator with bevel gear drive.
• Operating Temperature Range -20C to +80C.
• Surface Treatment Corrosion-resistant coating available for aggressive environments.

व्यापार सूचना

• आपूर्ति की क्षमता प्रति महीने
• डिलीवरी का समय दिन